APS | Secondary Impactor

KEY FEATURES

High Reduction Ratio

for the Cement, Recycling and Aggregates Industry

Reliable Production at up to 700 t/h

while utilising cost-efficient wear materials

Latest Safety Features

compliant with CE regulations

GET MORE INFO

APS | SECONDARY IMPACTOR

previous arrownext arrow
Slider

PRODUCT DESCRIPTION

APS Secondary Impactor
APS Secondary Impactor

The APS Series Secondary Impact Crusher is ideally suited for crushing medium-hard rock down to a well graded, highly cubical product size of 0 – 3 inch. Due to its operational flexibility, economical operation and excellent product size control, this machine is widely accepted as the machine of choice for the North American Aggregate Industry. 

APS with Third Crushing Path

The APS Series Secondary Impact Crusher, fitted with its third crushing path, is ideally suited for the crushing of medium-hard rock down to a well graded, very highly cubical, product size of 0 – 1½ inch. With its unique design, excellent control over the product grading and proven success, the APSM impact crusher is well suited to meet a wide range of application needs. 

Housing System
Housing System

The secondary crusher housing is a rugged, fabricated steel plate construction with heavy external bracing for increased strength. For quick and easy inspection of the internal wear parts, the housing is fitted with large doors which are secured/ opened by a special dovetail locking mechanism. The rear housing section opens hydraulically, permitting complete access to the internal wear parts. With emphasis on safety, the weight of the housing (open position) is transferred over center preventing it from closing on its own. 

Liner System
Liner System

With simplicity and function in mind, the housing is fitted with 1¼ inch thick, interchangeable, cast wear-resistant liners that have been designed as a common shape. The liners have an interchangeability level of approximately 95%. A further benefit with this liner design is realized in the form of increased wear metal utilization. A worn liner, for example, can be repositioned from a high wear zone (within the rotor circle), to a low wear zone (outside the rotor circle), thus extending its service life. The standardized design of the housing liner system helps to further reduce the impactor cost of operation.

1¼ inch thick 
Interchangeable 
Wear Liner
Apron System
Front Apron

The front apron (primary impact zone) is an extra heavy duty, fabricated component that is utilized for the initial flow control & reduction of the feed material. In its lower wear zone, the apron is fitted with a bolt-on, 3½ inch thick wear-resistant impact liner. With simplicity and function in mind, these liners have been standardized to a common shape, interchangeable with the rear apron liners.

Rear Apron

The rear apron (secondary impact zone) is a heavy duty, fabricated component that is utilized for the secondary flow control & reduction of the feed material. In its lower wear zone, the apron is fitted with a bolt-on, 3½ inch thick wear-resistant impact liner. With simplicity and function in mind, these liners have been standardized to a common shape, interchangeable with the front apron liners.

Third Crushing Path
Third Crushing Path (Patented Design)

The third crushing path (grinding path) is found in our APSM Third Crushing Path line of secondary impactors. The third crushing path is designed as a series of impact steps (or ledges) which provide an excellent level of control over the product grading, enhanced product soundness and very high cubical product shape. The third crushing path can be adjusted (top & bottom settings) through external hydraulic cylinders.

Rotor
KH Rotor (standard)


The success of the HAZEMAG KH Rotor can be found throughout the North American Aggregate Industry. Its very heavy duty construction, combined with its smart and fully functional design, has resulted in a secondary rotor system that delivers positive and beneficial results on every level. Its blowbars, offering a utilization factor of 50%, are secured into place by means of a massive backing bar and single piece wedge shoe. The KH Rotor is a very good choice for the processing of larger / slabby materials often associated with a primary jaw crusher.

K Rotor (lighter duty applications)


The success of the HAZEMAG K Rotor can be found throughout many North American industries; aggregates, cement, glass recycling and others. Its heavy duty construction, combined with its smart and fully functional design, has resulted in a secondary rotor system that delivers positive and beneficial results on every level. Its blowbars, offering a utilization factor of 50%, are secured into place by means of a backing bar and single piece wedge shoe. The K Rotor is a very good choice for the processing of typical material, such as limestone, not exceeding 10 inch in size. 

HAZtronic System
HAZtronic system

The exclusive and unique computer-controlled hydraulic adjustment system for the impact aprons (and third crushing path) allows for quick gap adjustments, optimum control over the product size, smoother crusher operation, tramp iron protection, reduced downtime and reduced operating costs. In our technically advanced HAZtronic system, the impactor performance can be optimized with recipes or pre-programmed apron settings, which further enhance the quality and consistency of the product. The HAZtronic system also allows you to optimize the correct apron settings with the varying material characteristics within the quarry. When fitted with either system, the impactor achieves a level of performance and economical operation that remains second to none. You are in control – producing the products you sell the most!

OPERATION, ADJUSTMENT AND CONTROL

With simplicity and function in mind, optimizing the performance of the HPI impact crusher is enhanced by a touch screen control panel. Opening the impactor housing and adjusting the impact aprons is performed at the touch of a button. This system also monitors and visually displays the apron positions, bearing temperatures, hydraulic fluid temperatures and hydraulic fluid levels.

TECHNICAL DATA

Main Components

APS
APS with Third
Crushing Path

APS | SECONDARY IMPACTOR

Model Capactiy
Tons/Hr
(Tonnes)
Power Requirements
HP (kw)
Inlet Size
In (mm)
(H x W)
Maximum
Feed Size
In (mm)
Rotor Size
In (mm)
(DxW)
Weight
Lb (Kg)
APS-0403  5
(4)
10
(7.5)
12 x 14
(305 x 360)
4 (100) 16 x 13
(406 x 330)
2,625
(1,190)
APS-0406  10
(9)
15
(12)
12 x 27
(305 x 690)
4 (100)  16 x 26
(406 x 660)
3,730
(1,695)
APS-0604  15
(13)
15
(12)
15 x 18
(380 x 470)
5 (125)  24 x 16
(620 x 406)
4,160
(1,890)
APS-0806  30
(27)
40
(30)
15 x 27
(390 x 690)
6 (150)  30 x 26
(780 x 670)
9,200
(4,180)
APS-0810  75
(68)
100
(75)
15 x 40
(390 x 1020)
6 (150)  31 x 40
(800 x 1000)
10,700
(4,860)
APS-0813  100
(90)
150
(112)
15 x 54
(390 x 1360)
6 (150)  40 x 52
(1000 x 1340)
14,900
(6,775)
APS-1006  50
(45)
75
(56)
22 x 27
(570 x 690)
8 (200)  40 x 26
(1020 x 670)
11,280
(5,125)
APS-1010  90
(81)
150
(112)
22 x 40
(570 x 1020)
8 (200)  40 x 40
(1020 x 1020)
15,800
(7,180)
APS-1013  150
(136)
200
(150)
22 x 54
(570 x 1360)
8 (200)  40 x 53
(1020 x 1340)
19,100
(8,680)
APS-1015  200
(181)
250
(188)
22 x 60
(570 x 1520)
8 (200)  40 x 59
(1000 x 1500)
21,100
(9,590)
APS-1020  250
(226)
350
(262)
22 x 80
(570 x 2030)
8 (200)  40 x 79
(1000 x 2000)
24,700
(11,230)
APS-1310  125
(113)
2000
(1800)
34 x 40
(865 x 1020)
10 (250)  53 x 40
(1340 x 1020)
30,100
(13,680)
APS-1313  250
(226)
200
(150)
34 x 54
(865 x 1360)
10 (250)  53 x 53
(1340 x 1340)
37,700
(17,140)
APS-1315  300
(272)
300
(225)
34 x 60
(865 x 1520)
10 (250)  53 x 59
(1340 x 1500)
40,640
(18,475)
APS-1320  400
(362)
400
(300)
34 x 80
(865 x 2030)
10 (250)  53 x 79
(1340 x 2010)
52,700
(23,950)
APS-1430  900
(816)
500
(375)
38 x 119
(970 x 3020)
10 (250)  57 x 118
(1450 x 3000)
86,800
(39,450)
APS-1513  300
(272)
300
(225)
37 x 54
(950 x 1360)
12 (300)  59 x 52
(1500 x 1340)
40,735
(18,515)
APS-1515  375
(340)
400
(300)
37 x 60
(950 x 1520)
12 (300)  59 x 59
(1500 x 1500)
43,825
(19,920)
APS-1520  450
(408)
500
(375)
37 x 80
(950 x 2030)
12 (300)  59 x 79
(1500 x 2000)
55,600
(25,270)
APS-1615  400
(362)
500
(375)
35 x 60
(890 x 1520)
14 (350)  64 x 59
(1610 x 1500)
51,600
(23,450)
APS-1620  500
(453)
600
(450)
35 x 80
(890 x 2030)
14 (350)  64 x 79
(1600 x 2010)
63,100
(28,680)
APS-1622  650
(590)
700
(525)
35 x 90
(890 x 2270)
14 (350)  60 x 89
(1600 x 2250)
67,500
(30,680)
APS-1630  1100
(1088)
1200
(900)
35 x 119
(890 x 3020)
14 (350)  64 x 118
(1600 x 3000)
97,500
(44,320)

APS | SECONDARY IMPACTOR with GRINDING PATH

Model Capactiy
Tons/Hr
(Tonnes)
Power Requirements
HP (kw)
Inlet Size
In (mm)
(H x W)
Maximum
Feed Size
In (mm)
Rotor Size
In (mm)
(DxW)
Weight
Lb (Kg)
APSM-0806 30
(27)
60
(45)
15 x 27
(390 x 690)
6 (150) 30 x 26
(780 x 670)
9,900
(4,500)
APSM-0810 75
(68)
125
(90)
15 x 40
(390 x 1020)
6 (150) 31 x 40
(800 x 1000)
11,600
(5,270)
APSM-0813 100
(90)
200
(150)
15 x 54
(390 x 1360)
6 (150) 31 x 52
(800 x 1340)
13,800
(6,270)
APSM-1006 50
(45)
100
(75)
22 x 27
(570 x 690)
8 (200) 40 x 26
(1020 x 670)
12,100
(5,500)
APSM-1010 90
(81)
200
(150)
22 x 40
(570 x 1020)
8 (200) 40 x 40
(1020 x 1020)
16,500
(7,455)
APSM-1013 150
(136)
250
(190)
22 x 54
(570 x 1360)
8 (200) 40 x 53
(1020 x 1340)
20,100
(9,140)
 APSM-1015 200
(181)
300
(250)
22 x 60
(570 x 1520)
8 (200) 40 x 59
(1000 x 1500)
22,300
(10,140)
 APSM-1020 250
(226)
400
(300)
22 x 80
(570 x 2030)
8 (200) 40 x 79
(1000 x 2000)
27,300
(12,400)
 APSM-1310 125
(113)
250
(190)
34 x 40
(865 x 1020)
10 (250)  53 x 40
(1340 x 1020)
34,300
(15,590)
 APSM-1313 250
(226)
400
(300)
34 x 54
(865 x 1360)
10 (250) 53 x 53
(1340 x 1340)
44,115
(20,050)
APSM-1315  300
(272)
500
(375)
34 x 60
(865 x 1520)
10 (250) 53 x 59
(1340 x 1500)
47,100
(21,410)
APSM-1320  400
(362)
600
(450)
34 x 80
(865 x 2030)
10 (250) 53 x 79
(1340 x 2010)
59,150
(26,885)
APSM-1430  900
(816)
1200
(900)
38 x 119
(970 x 3020)
10 (250) 57 x 118
(1450 x 3000)
102,500
(46,590)
APSM-1513  300
(272)
500
(375)
37 x 54
(950 x 1360)
12 (300) 59 x 52
(1500 x 1340)
42,200
(19,180)
APSM-1515  375
(340)
600
(450)
37 x 60
(950 x 1520)
12 (300) 59 x 59
(1500 x 1500)
45,400
(20,640)
APSM-1520  450
(408)
700
(525)
37 x 80
(950 x 2030)
12 (300) 59 x 79
(1500 x 2000)
57,600
(26,180)
APSM-1615  400
(362)
600
(450)
35 x 60
(890 x 1520)
14 (350) 64 x 59
(1610 x 1500)
64,765
(29,440)
 APSM-1620 500
(453)
800
(600)
35 x 80
(890 x 2030)
14 (350) 64 x 79
(1600 x 2010)
79,200
(36,000)
APSM-1622 650
(590)
1000
(750)
35 x 90
(890 x 2270)
14 (350) 60 x 89
(1600 x 2250)
83,740
(38,065)
APSM-1630 1100
(1088)
1600
(1200)
35 x 119
(890 x 3020)
14 (350) 64 x 118
(1600 x 3000)
113,500
(51,590)