Tertiary Models
HAZEMAG HTI APVMH
The HAZEMAG HTI APVMH Series Secondary / Tertiary Impact Crusher is ideally suited to crush medium-hard materials down to a highly cubical, well graded product size of 0 – 1 inch (up to 70% passing 4 mesh) in a single pass based on typical limestone. The versatility of this machine permits its application within a plant/system where the secondary production of concrete stone (chippings) is required and (or) the tertiary production of manufactured sand is needed. The APVMH is also fitted with a 3rd crushing path, a tool that offers the ability to influence the product gradation to the highest possible level. Depending on the application needs, the HTI APVMH impact crusher can be fitted with a 2 or 4 row rotor design.
Spec Table – APVMH
HTI APVMH Crusher Specifications
Scroll Left or Right at the bottom of table to view information.
| Model | Capactiy Tons/Hr (Tonnes) |
Power Requirements HP(kw) |
Inlet Size In (mm) (H x W) |
Maximum Feed Size In (mm) |
Rotor Size In (mm) (DxW) |
Weight Lb (Kg) |
|---|---|---|---|---|---|---|
| APVMH-1005 R | 45 – 65 (40 – 60) |
150 – 250 (110 – 200) |
10 x 20 (260 x 510) |
6 (150) |
40 x 20 (1000 x 500) |
16,940 (7,700) |
| APVMH-1007 R | 65 – 130 (60 – 120) |
200 – 400 (160 – 315) |
10 x 40 (260 x 1020) |
6 (150) |
40 x 40 (1000 x 1000) |
26,840 (12,200) |
| APVMH-1010 R | 130 – 175 (120 – 160) |
250 – 400 (200 – 315) |
10 x 40 (260 x 1020) |
6 (150) |
40 x 52 (1000 x 1400) |
31,680 (14,400) |